Plasterer Cost and Plastering Pricesin the Netherlands: 2026 Guide

The plasterer cost in the Netherlands is often €10 to €35 per m² for standard indoor plastering. Spray plaster may cost €8 to €16 per m². A ceiling often costs €14 to €35 per m², while exterior plaster is commonly €30 to €65 per m². A plasterer may charge €40 to €65 per hour for small or unclear jobs.

2026 Dutch plastering prices
Per-m², hourly and project rates
Walls, ceilings, preparation and VAT
Plasterer smoothing a wall

Current price ranges

Across the Netherlands

Compare quotes

Portrait photo of Arek

By Arek

Updated August 4, 2026 · 22 min read

Average plasterer costs and prices in 2026

ItemPrice rangeNote
Paint-ready plaster€10 – €20 per m²Basic finish, ready for painting
Wallpaper-ready plaster€10 – €22 per m²Between paint-ready and smooth
Smooth plaster€15 – €25 per m²Smooth finish for modern interiors
Decorative plaster€25 – €45 per m²Decorative texture, premium look
Exterior plasterwork€35 – €65 per m²Weather-resistant, incl. prep work
Spray plaster€8 – €15 per m²Fast method for large surfaces
Priming / surface prep€2 – €5 per m²Optional, sometimes DIY
Wall plastering€15 – €25 per m²Depends on substrate condition
Ceiling plastering€18 – €30 per m²Higher due to working height and gravity
Full-house interior plastering€5,000 – €12,000Average terraced home, excl. VAT
Plasterer hourly rate€45 – €65 per hourExcluding VAT and materials
Minimum fee for small jobs€300 – €350Often for jobs under 30 m²
Living room plastering€400 – €800Average living room ±20–30 m²
Bedroom plastering€300 – €500Average bedroom ±12–18 m²
Kitchen plastering€500 – €700Excl. waterproof finish
Bathroom or toilet plastering€600 – €1,200Requires moisture-resistant plaster

Average cost to hire a plasterer in the Netherlands

Use this table for an early budget. The ranges cover many jobs. A low rate may cover a thin finish on a stable surface. A higher rate may include primer, levelling, several plaster coats or hard-to-reach areas.

Plastering workTypical Dutch priceTypical scope
Standard indoor plastering€10–€35 per m²Normal wall or ceiling finish.
Wallpaper-ready plaster€10–€23 per m²Level base for wallpaper.
Paint-ready plaster€12–€30 per m²Smoother surface before painting.
Spray plaster or spack€8–€16 per m²Fast finish on larger areas.
Thin skim or fine plaster€8–€20 per m²Small defects on a stable base.
Thick levelling plaster€18–€40 per m²Rough or damaged base.
Decorative plaster€16–€35 per m²Textured finish such as spachtelputz.
Ceiling plastering€14–€35 per m²Overhead work at normal height.
Exterior wall plastering€30–€65 per m²Weather-resistant facade system.
Plasterer hourly rate€40–€65 per hourRepairs or unclear small work.
Small-job base€290–€350 per projectSetup, floor covers and travel.
Basic primingAbout €3–€5 per m²When not covered in the main rate.

Expert finishes sit outside the standard range. Beton ciré, polished plaster and tadelakt may cost €100 to €250 per m². They use other systems and need expert skill. Confirm whether sealing, waterproofing and substrate preparation are covered.

What is covered in a normal plastering price?

A normal per-m² quote may include labour, basic plaster and work. It may also include basic masking and cleanup. It does not always include repairs, primer, old plaster removal or waste.

Ask whether the rate covers:

  • inspecting and preparing the base.
  • primer or bonding coat.
  • corner beads and small crack filling.
  • the stated number and type of plaster coats.
  • labour and materials.
  • protecting floors, windows and doors.
  • waste removal and final cleanup.
  • access gear, travel and VAT.

Two quotes at €20 per m² can cover very different work. Compare the written scope before comparing the total.

Why do published plastering prices differ?

Some guides show only a thin skim. Others show full levelling and a fine finish. VAT may be included or excluded. Room size and the state of the old plaster also change the price.

There is no single national rate. A plasterer must inspect the actual area. Photos and sizes help. A site visit can reveal loose plaster, damp or poor adhesion.

How much does plastering cost per square metre?

Plastering per square metre works best for repeated wall and ceiling work. It also suits large plastering jobs. The floor area is not used. You need the surface area of each wall and ceiling that will receive plaster. The area they are plastering must be measured first. Some quotes write this as m2 or square meters. This guide uses m².

For one straight wall, multiply its width by its height:

4 metres wide × 2.5 metres high = 10 m²

At €15 to €30 per m², the simple sum is €150 to €300. A small-job base can still raise the quote to around €290 to €350.

How do you measure a full room?

Measure the width and height of each wall. Add the four wall areas. Measure the ceiling as a separate area. A room with four walls can have far more wall and ceiling area than its floor plan suggests.

Example:

  • two walls of 4 × 2.5 metres: 20 m².
  • two walls of 3 × 2.5 metres: 15 m².
  • ceiling of 4 × 3 metres: 12 m².
  • total before deductions: 47 m².

Large windows and doors may be deducted. Small openings may not be. Their edges and corners still need work. Ask the plasterer how sizes are set.

Does a larger area cost less per m²?

Often, yes. Travel, masking, mixing and cleanup are spread across more square metres. Large, open and empty areas are also easier to plan.

The saving is not assured. A large worn surface can still need major repair. High rooms, many corners and occupied spaces can keep the unit rate high.

What does plastering 100 m² cost?

At €10 to €35 per m², a simple sum gives €1,000 to €3,500 for 100 m². The final price depends on the finish and base. A thick levelling coat, removal, height or expert plaster can move the total outside that range.

Make sure that “100 m²” means plasterable wall or ceiling area. It should not mean a 100 m² home floor plan.

Plastering prices by finish and type of plaster

The finish level has a major effect on the overall cost. Describe what will happen after plastering. A base for wallpaper does not need the same finish as a wall under critical lighting.

Wallpaper-ready plaster

Wallpaper-ready plaster creates an even base for wallpaper. It is not normally smooth enough for direct painting. It often costs €10 to €23 per m².

The quote should state whether holes, joints and strong suction are treated first. Wallpaper and hanging are not included unless listed. See the wallpapering cost guide for the next stage.

Paint-ready plaster

Paint-ready plaster needs a finer and more even finish. It often costs €12 to €30 per m². The meaning of “paint-ready” must be written down. Some quotes include only the plaster finish. Sanding, primer and paint may still be split.

Fresh plaster must dry before decoration. Drying time depends on thickness, airflow, heat and moisture. The plasterer or painter should confirm when coating can start.

The wall painting cost guide explains the cost of priming and painting after the plaster is ready.

Spray plaster or spack

Spray plaster often costs €8 to €16 per m². It can be fast on large walls and ceilings. Masking must be thorough, so the method is most useful in an empty or bare space.

Ask whether the quote covers the base coat, texture coat, colour and full masking. Spray plaster is not the same as spraying wall paint.

Thin skimming

A thin skim coat covers small defects and creates a smoother surface. It often costs €8 to €20 per m² on a stable base. The cost of skimming stays low only when the existing plaster is sound.

Loose, hollow or blown plaster cannot simply be hidden with a thin coat. The weak area may need removal and repair first.

Thick levelling plaster

Very rough brickwork or damaged walls may need a thicker undercoat plaster. This work often costs €18 to €40 per m². More material, levelling and drying time are needed.

Ask the plasterer to state the planned thickness. A quote for a 3 mm skim should not be compared with one for 20 mm of levelling plaster.

Decorative and expert plaster

Textured decorative plaster often costs €16 to €35 per m². Polished plaster, beton ciré and tadelakt can be far more costly. Colour, sealing, waterproof zones and sample panels affect the price.

Expert finishes should be quoted as a complete system. Check the base, coats, sealer, corners and maintenance advice.

How much does it cost to plaster a room, wall or ceiling?

The surface type changes both speed and risk. Ceiling plastering is slower. A small room has more corners per square metre. An open wall is often more fast.

Cost to plaster a wall

The cost to plaster a wall is often €10 to €30 per m² for standard indoor work. A thin skim can sit near the lower end. A thick base coat or a fine paint-ready result costs more. Ask what it costs to get the wall plastered to the stated finish.

One wall may still trigger a project base. A 12 m² wall at €20 per m² gives €240, but the quote may start near €290 to €350 because setup and cleanup are still needed.

Cost to plaster a ceiling

The cost to plaster a ceiling is often €14 to €35 per m². It takes more time and masking to plaster ceilings. Height, cracks, old texture and light fittings can increase labour. A plasterer may work in stages.

The quote should explain whether fittings are taken out, isolated or protected. Installing a new plasterboard ceiling is a other job from applying plaster to an existing ceiling.

Cost of plastering a room

The cost of plastering a room depends on wall area, not only room size. A basic bedroom may have 35 to 50 m² of walls and ceiling. At standard rates, a sum may give €500 to €1,750.

This range is only an example. Skirting, windows, heaters, large items and repairs affect access. A full room with weak old plaster may cost more.

Cost to plaster a whole house

First measure the walls and ceilings. A house with 200 m² of wall and ceiling area may produce a simple guide of €2,000 to €7,000 at €10 to €35 per m².

The total can rise when the house needs old plaster removal, a thick base coat, stairwell access or many phases. It can fall per m² when the home is empty and all rooms use one finish.

Do not compare whole-house offers only by the final number. Ask for a room schedule and a price for each finish.

Interior and exterior plastering

Exterior plastering often costs €30 to €65 per m². The system must suit rain, frost and heat changes. Scaffold, facade repair and weather planning can add cost.

Exterior insulation with a rendered finish is not the same scope. Insulation, fixings, profiles and design details may be priced separately. Structural facade repair also sits outside normal plastering.

Plasterer labour cost: hourly rate, day rate or fixed quote

A professional plasterer may charge per m², per hour or per project. The clearest method depends on the work.

Pricing methodOften suitsWhat to check
Per m²Large walls and ceilingsMeasured area, finish and preparation.
HourlySmall repairs or unclear surfacesExpected hours and material cost.
Day rateDefined repair or specialist workWorking hours and team size.
Fixed project priceRooms, homes and clear scopesFull inclusions and exclusions.

What is a normal plasterer hourly rate?

A plasterer hourly rate is often €40 to €65. Some simple work may be quoted lower. Expert repair or hard access can cost more.

Ask whether the hourly price covers materials, travel, mixing, masking and cleanup. The cheapest hourly rate does not always create the lowest final bill.

How much is a plasterer per day?

Eight hours at €40 to €65 gives a simple labour estimate of €320 to €520. This is not a guaranteed day rate. A plasterer may define a working day differently or use a team.

A day price should state the number of workers and likely output. It should also list materials, travel, gear and VAT.

When is a fixed price better?

A fixed plastering quote is easier to compare when the surface and finish are clear. It limits doubt about normal working speed. It does not cover hidden damage unless the contract says so.

Agree how extra work is approved. Photos and a written variation protect both sides when old plaster fails after work begins.

What changes the total plastering cost?

Most price differences come from the base, finish and access. The clear room size tells only part of the story.

Condition of the existing plaster

Stable existing plaster may only need cleaning, primer and a skim. Loose or blown plaster must be taken out. Cracks may need opening and reinforcement.

Damp needs a cause, not a cosmetic cover. Leaks, rising damp or external water entry should be solved before new plaster is applied.

Wall material

Brick, concrete, plasterboard, old paint and existing plaster need other preparation. A smooth, dense base may need a bonding primer. A porous surface may need suction control.

Plasterboard joints and screw heads need the correct treatment. Installing boards, partitions or a new ceiling should be listed separately.

Finish and number of coats

A wallpaper-ready base needs less finishing than a high-grade smooth wall. A thick base coat adds material and drying time. Side lighting can make small defects clearer.

Use plain wording in the quote. Terms such as “smooth” and “ready” can mean other things to other contractors.

Corners, edges and details

Window reveals, arches, niches and many outside corners slow the job. Corner beads, movement joints and trim work add material and labour.

A simple open wall can cost less per m² than a small bathroom with the same area.

Access and use

High ceilings, stairwells and facade work may need a tower or scaffold. An occupied home needs more masking and daily cleanup. Large items can reduce working space.

Tell the plastering company about narrow stairs, lifts, parking and working-hour limits before the quote.

Preparation, plaster repair and removal of existing plaster

Preparation is often the largest gap between a low estimate and a final quote. Ask for separate lines when the state is unclear.

Primer and bonding coat

Basic priming may add about €3 to €5 per m² when it is not covered. The product must suit the base. Applying the wrong primer can cause poor adhesion.

Do not prime the walls yourself unless the plasterer agrees on the product and method in writing.

Removal of old plaster

Removing old plaster adds labour, dust control, waste and waste. The cost varies too much for one safe national rate. Ask for a price per m² or a clear provisional allowance. The quote should say who will remove any old plaster.

The quote should state whether the plasterer removes only loose areas or the full surface. It should also cover bags, carrying routes and waste fees.

Crack and patch repair

A small plaster repair may be priced by the hour or under the base charge. Repeated cracks may indicate movement. The cause should be assessed before a new coat of plaster hides it.

Large repairs, rotten timber, live damp and structural shift can require another specialist.

Protection and cleanup

Plastering creates water, dust and waste. Confirm floor sheets, masking, access routes and final cleaning. Ask who moves heaters, sockets, skirting and large items.

If another trade must disconnect fittings, include that in the project plan.

Scaffolding and access gear

Exterior walls and high rooms may need safe gear. Ask whether delivery, setup, hire time and permits are covered.

The scaffold should suit the plastering work. A painter's ladder or basic access guide may not be enough for a wet facade system.

Painting and other follow-on work

Painting, wallpapering and tiling are separate unless the quote covers them. Compare the combined plastering and painting cost only after both scopes are clear.

For decoration after drying, use the painter cost guide. A wet-room renovation may also involve waterproofing, plumbing and tiles; see the bathroom renovation cost guide.

VAT on plastering work in the Netherlands

Plastering an eligible home more than two years old can fall under 9% VAT. The reduced rate can cover the plastering service, preparation, pre-treatment and materials used in that work.

The official Dutch Tax Administration plastering guidance confirms this scope.

When does 9% VAT apply?

The work must concern a home used for a private home. The home must be more than two years old when the work takes place. Some linked spaces on the same home can also qualify.

The age period starts when the building was first used as a home. The official age and home rules explain the conditions.

When can 21% VAT apply?

The standard 21% rate can apply to:

  • plastering a new home that does not meet the age rule.
  • work on business space or a non-qualifying home.
  • installing plasterboard walls.
  • installing wall tiles or floors.
  • work that is too far taken out from plastering.

A mixed project may need separate VAT lines. Ask the plasterer to state the scope and rate on the quote and invoice.

Are plaster materials always taxed at 21%?

No. Materials used as part of eligible plastering work can fall under 9%. This differs from some other reduced-rate building rules.

Do not assume that each material purchase qualifies. Products supplied outside the plastering service can be treated differently. The plasterer should apply the correct rate to the invoice.

Compare quotes from plasterers using the same list:

  • measured area and unit rate.
  • labour and plaster materials.
  • primer, repairs and old plaster removal.
  • masking and cleanup.
  • scaffold, travel and parking.
  • waste and waste.
  • VAT.
  • extra-work consent and payment terms.

The ACM ConsuWijzer quote checklist recommends checking the work details, price agreement, timing, terms and extra costs.

Bundle compatible work

Several rooms can share travel, setup and cleanup. An empty home can be easier to protect. Ask for a combined price and a room-by-room split.

Do not create extra work only to lower the rate per m². Compare the total you need to spend.

Prepare access, not the plaster surface

You may save time by clearing large items and access routes. Agree who removes curtains, fittings and heaters.

Do not strip plaster or apply primer without consent. Poor preparation can add fix work and affect responsibility for the finish.

Compare plasterers

Ask about experience with the exact finish and base. Review photos of similar work and confirm insurance where relevant. A good plasterer should explain the prep and finish in plain terms. Put the scope, timing, payment and changes in writing.

You can review plastering services, get quotes and compare responses from independent plasterers. SkilledContractors is a comparison platform and does not set the final plasterer price.

Plasterer labour cost: hourly rate, day rate or fixed quote

A professional plasterer may charge per m², per hour or per project. The clearest method depends on the work.

What is a normal plasterer hourly rate?

A plasterer hourly rate is often **€40 to €65**. Some simple work may be quoted lower. Expert repair or hard access can cost more. Ask whether the hourly price covers materials, travel, mixing, masking and cleanup. The cheapest hourly rate does not always create the lowest final bill.

How much is a plasterer per day?

Eight hours at €40 to €65 gives a simple labour estimate of **€320 to €520**. This is not a guaranteed day rate. A plasterer may define a working day differently or use a team. A day price should state the number of workers and likely output. It should also list materials, travel, gear and VAT.

When is a fixed price better?

A fixed plastering quote is easier to compare when the surface and finish are clear. It limits doubt about normal working speed. It does not cover hidden damage unless the contract says so. Agree how extra work is approved. Photos and a written variation protect both sides when old plaster fails after work begins.

How much does it cost to plaster a room, wall or ceiling?

Cost to plaster a wall

The cost to plaster a wall is often **€10 to €30 per m²** for standard indoor work. A thin skim can sit near the lower end. A thick base coat or a fine paint-ready result costs more. Ask what it costs to get the wall plastered to the stated finish. One wall may still trigger a project base. A 12 m² wall at €20 per m² gives €240, but the quote may start near €290 to €350 because setup and cleanup are still needed.

Cost to plaster a ceiling

The cost to plaster a ceiling is often **€14 to €35 per m²**. It takes more time and masking to plaster ceilings. Height, cracks, old texture and light fittings can increase labour. A plasterer may work in stages. The quote should explain whether fittings are taken out, isolated or protected. Installing a new plasterboard ceiling is a other job from applying plaster to an existing ceiling.

Cost of plastering a room

The cost of plastering a room depends on wall area, not only room size. A basic bedroom may have 35 to 50 m² of walls and ceiling. At standard rates, a sum may give **€500 to €1,750**. This range is only an example. Skirting, windows, heaters, large items and repairs affect access. A full room with weak old plaster may cost more.

Cost to plaster a whole house

First measure the walls and ceilings. A house with 200 m² of wall and ceiling area may produce a simple guide of **€2,000 to €7,000** at €10 to €35 per m². The total can rise when the house needs old plaster removal, a thick base coat, stairwell access or many phases. It can fall per m² when the home is empty and all rooms use one finish. Do not compare whole-house offers only by the final number. Ask for a room schedule and a price for each finish.

Interior and exterior plastering

Exterior plastering often costs **€30 to €65 per m²**. The system must suit rain, frost and heat changes. Scaffold, facade repair and weather planning can add cost. Exterior insulation with a rendered finish is not the same scope. Insulation, fixings, profiles and design details may be priced separately. Structural facade repair also sits outside normal plastering.

Frequently asked questions

Answers to common questions.

How much does plastering cost in the Netherlands?

The average cost for standard indoor work is often €10 to €35 per m². The finish, wall condition, access and project size set the final plastering cost.

How much does a plasterer cost per m²?

Standard indoor plastering often costs €10 to €35 per m². Spray plaster may cost €8 to €16 per m². Ceilings and damaged walls can cost more.

How much does a plasterer cost per hour?

A plasterer often charges €40 to €65 per hour for small or unclear work. Ask whether materials, travel, masking, cleanup and VAT are covered.

How much does it cost to plaster a room?

A bedroom with 35 to 50 m² of walls and ceiling may produce a simple guide of €500 to €1,750. The finish, damage, corners, access and project base set the final quote. If you are wondering how much to plaster a room, measure each wall and the ceiling. The size of the room floor is not enough.

How much does it cost to plaster 100 m²?

At €10 to €35 per m², the basic guide is €1,000 to €3,500. Confirm that 100 m² is the actual wall and ceiling area, not the home's floor area.

Why do plasterers charge so much?

The price covers more than applying wet plaster. Protection, mixing, smoothing, corners, cleanup and drying control take time. Repairs, height and a fine finish add labour.

Is skimming cheaper than full plastering?

Yes, when the existing plaster is stable. A thin skim may cost €8 to €20 per m². Loose or badly rough surfaces need repair or thicker smoothing first.

Can a plasterer cover old plaster?

Sometimes. The old plaster must be dry, stable and well bonded. Loose, hollow or stained areas need removal or repair before a new coat is applied. If the plaster is in poor condition, a thin skim is not enough. Ask whether full removal or local plaster repair is needed.

Is painting included after plastering?

Often not. The quote should state whether primer and paint are included. Fresh plaster must reach the needed dryness before painting.

Does 9% VAT include plaster materials?

It can. For eligible plastering in a home more than two years old, 9% can cover preparation, pre-treatment and used materials. Unrelated work can remain at 21%.

What should a plastering quote include?

It should list the measured area, finish, preparation, coats, repairs, masking, materials, cleanup, access gear, travel, waste, VAT and extra-work process. It should also name the type of plaster used.

Is DIY plastering cheaper?

DIY removes professional labour but adds tools, materials, time and fix risk. Small patches may suit an experienced homeowner. Large clear walls and ceilings are hard to finish evenly.

How long does plaster take to dry?

It depends on thickness, product, substrate, airflow, heat and damp air. Follow the product and contractor advice. Do not paint only because the surface feels dry.

How many quotes should I compare?

There is no fixed number. Two or three written quotes can be useful when they cover the same scope. One clear quote is more useful than many vague estimates. Ready to compare? Post your plastering project with photos, sizes, the current surface and needed finish. Then compare profiles and written quotes from independent pros before you choose.

How to hire a plasterer and compare plastering quotes

The best quote is the clearest same scope. A low total can become costly when primer, repairs or cleanup are missing. This matters when choosing a plasterer or hiring a professional for a large area. Give each plasterer: wall and ceiling sizes., clear photos of each surface., the age and use of the home., the current substrate and clear damage., the needed finish., access, parking and use details., the desired timing and follow-on work. State whether you need one wall, a full room or the entire home. Mention any known damp, loose plaster or old layers. Check whether each quote is wallpaper-ready, paint-ready, spray plaster or decorative plaster. Compare the planned thickness and preparation. Ask for a sample or written finish details when appearance is important. Do not rely only on local trade names.

Post a job

Related services